Assessing And Fixing A Noisy Garage Door
Both homeowners and their neighbors may be bothered by a loud garage door. The noise is bothersome and may also be a clue that your door is not working properly. If you are experiencing problems with noise, it is paramount to find the source of the garage door problem and address it as soon as possible.
Tip: Inspect The Tracks And Rollers
The garage door's rollers and tracks are essential for its proper functioning. However, they can also be sources of unwanted noise if not properly maintained. Dirt, debris, or grease buildup on either component can cause friction during operation, increasing noise levels. Clean the tracks and rollers with mild detergent and water using a small brush or toothbrush. Wipe everything down with a clean cloth once done.
Loose bolts or brackets within the track system may contribute to excessive rattling during use. Inspect all hardware associated with your tracks carefully, and tighten any bolts or brackets that appear loose using an appropriate wrench.
Tip: Check The Opener Chain
The opener chain is another component that may generate excess noise when not adequately maintained. A slack opener chain creates unnecessary banging sounds whenever your garage door is used. To fix this issue, locate your owner's manual for instructions on correctly adjusting tension. This usually involves tightening nuts or changing sprocket settings.
Applying lubricant specifically designed for garage door chains helps reduce operational friction, which causes excessive sound output during use. You may spray ample amounts onto each link, ensuring even coverage throughout to reduce these noises.
Tip: Get Rid Of Rust
Rust on your garage door can cause excessive noise and affect its overall performance, potentially leading to more significant issues. Inspect all surfaces of your garage door for signs of rust, paying particular attention to hinges, springs, and metal panels. Rust may not always be immediately visible. Therefore, it is crucial to check behind any decorative elements or seals as well.
To remove rust effectively, use sandpaper or a wire brush to carefully scrub away affected areas until the metal surface is clear. Once all rust has been removed, clean the area with a damp cloth before applying a high-quality primer and appropriate paint for exterior metal applications.
Tip: Inspect the Door Balance
Testing whether your garage door is balanced correctly requires you to disconnect it from its opener and manually lift it halfway up. If properly balanced, it should stay in place without assistance. However, if it falls back down or continues rising by itself, this indicates an imbalance issue that needs addressing. A professional is needed to restore the door's balance effectively.
For more information on garage door repair, contact a company near you.
Share